The Bath & Shower Fix & Seal Systems for Newbuilds, Replacements & Existing Installations.
A total leak proof way to fix Baths & Showers
(Patented)
Existing installations
Your kit comes with everything needed to fit the installation that you have purchased, including the extrusion, mitred at one end of each length, mitre covers & end caps as required, tape & fixings
It can fit under the tiles on the existing walls ( the preferred option) or on top of tiles.
The extrusions are available in 3 pack types.
Cut to size kits
With no waste, including all wall fitting to suit your installation situation, end caps & mitre covers, foam & double sided adhesive seals where required.
or for you to cut to size
1.8 Metre lengths or 3.6 metre lengths
Accessories to suit.
Colour available is white. But other colour matches can be made by special order.
The sealing extrusion below can be used when there is a MINIMUM OF 1mm gap between the tiling or plaster work on new or existing installations, because the elongated leg that pushes down into the gap between the wall and the bath or shower has corregations, it is gripped tight when inserted into a silicone seal, the soft formed rubber seals tightly press againt the wall and bath forming a double seal with the silicone, the silicon is not shown, once fixed .
Please Note: all payments are totally secure and are processed by PayPal, NOT BY MY COMPANY.
Minimum/Maximum Sizes
between wall or tiling &
Bath or Shower edge/roll.
Single Extrusion
Minimum 1 mm
Maximum 10 mm
FIT -ON PRODUCTS
6 TOP SCHWABE ST
MIDDLETON
MANCHESTER
M24 4TQ
Tel No 0161 643 1296
Web page
www.fit-onproducts.com
E- mail
fit-onproducts@tiscali.co.uk
Copyright© 2007
All products on this website are patented.
| n |
Can be fitted to new or existingbath/shower roll |
| n |
No need for battens or clips
onto the wall as support |
| n |
No silicone or other sealants are shown on the outside |
| n |
Special desinged leg fits between bath & wall the bath cannot sink |
| n |
No water seepage -
Compressed soft rubber seals. No water penitration.No silicone showing |
| n |
Top extrusion can take any number of individual colour finishes |
| n |
Top quality P.V.C.U. plastic used |
| n |
Stop ends & mitre covers for that professional finish |
| n |
Incorporates a moulded finish to the top, keeps the tiling of the bath top, no discolouration |
| n |
It can be used on top of or underneath tiling |
Bath roll hight.
any size between 30mm to 50mm
Full Kits supplied include: extrusions, end caps, mitre covers, seals, fixings, & full easy to follow installation instructions. Including V.A.T. & Delivery
or direct transfer from your internet bank:
NEW OR EXISTING INSTALLATIONS. SINGLE TOP EXTRUSION
KITS. FOR EXISTING BATH INSTALLATIONS.
010 Fix & Seal Existing Bath installations KIT. 3 sides 2 x 1.0 metre.1 x 1.9metre. £21.13
012 Fix & Seal Existing Bath installations KIT. 2 sides 2 x 1.0 metre.1 x 1.9metre. £17.98
KITS. FOR EXISTING SHOWER INSTALLATIONS.
014 Fix & Seal Existing Shower installations KIT. 3 sides 3 x 1.0 metre .£18.40
015 Fix & Seal Existing Shower installations KIT. 2 sides 2 x 1.0 metre. £15.39
LENGTHS. SINGLE EXTRUSION
016 Per Metre. Double sided tape fitted £2.01
Supplied as
007 Per Length. 3.6 or 1.8 metres Double sided tape fitted
017 Per Pack 1.8 x 10 = 18 metres. Double sided tape fitted
018 Per Pack 3.6 x 10 = 36 metres. Double sided tape fitted
Note: Discounts subject to Order value
ACCESSORIES
031 End Caps right & left hand.10 to 12mm extrusion Only Each £0.28 £0.45
024 End Caps right & left hand. 20 to 23mm extrusion Each.
032 Mitre Covers 90º internal Each.
033 Mitre Covers 90º external. Each.
034 Mitre Covers 135º internal Each.
BOXES
035 . Boxes of 25.of each type. £5.25
Please note: all prices except Kits are EXCLUSIVE OF V.A.T. DELIVERY CHARGES WHERE APPROPREATE
if you wish to discuss your order or installation Tel 0161 643 1296
Please Email or fax me your order. no money to pay until you are
advised your order is ready for dispatch.